Registrations: Open
Register here.

(CP_a102) Charging stopped High temperature detected by Wall Connector

Common or not so common error messages received on Tesla vehicles and devices. If you receive an error, please post a picture and the error message in this forum.
Post Reply
TeslaKingLong
Site Admin
Posts: 116
Joined: Sun Sep 06, 2020 4:28 pm
Location: Chicago
Contact:

(CP_a102) Charging stopped High temperature detected by Wall Connector

Post by TeslaKingLong »

High temperature detected by Wall Connector alerts indicate the building connection to the Wall Connector is getting too warm, so charging has stopped to protect the wiring and Wall Connector. This is not typically an issue with your vehicle or your Wall Connector, but rather an issue with the building wiring. This may be caused by a loose building wiring connection to the Wall Connector and can be fixed quickly by an electrician.

To regain normal charge operation, contact an electrician to inspect the building wiring connection to the Wall Connector. They should make sure that all wires are properly connected and torqued according to the installation guide for the Wall Connector.
$TSLA Shareholder since the beginning.
Post Reply