Registrations: Open
Register here.

(GTW_w360) Assist for low brake performance activated To stop, keep brake pedal firmly pressed

Common or not so common error messages received on Tesla vehicles and devices. If you receive an error, please post a picture and the error message in this forum.
Post Reply
TeslaKingLong
Site Admin
Posts: 116
Joined: Sun Sep 06, 2020 4:28 pm
Location: Chicago
Contact:

(GTW_w360) Assist for low brake performance activated To stop, keep brake pedal firmly pressed

Post by TeslaKingLong »

Hydraulic Fade Compensation is active. This brake assist function activates temporarily to make sure you have full braking capability in conditions where reduced braking performance is detected by your vehicle.

Continue to press the brake pedal as you normally would, and do not "pump" (repeatedly press and release) the pedal as this will interrupt the function.
This alert will clear when your vehicle comes to a stop or you are no longer pressing the brake pedal. It may still be displayed for up to 5 seconds afterward.

When this assist function activates, you may feel the brake pedal pull away from your foot and notice a strong increase in brake pressure. You may also hear a pumping sound coming from the brake hydraulic unit at the front of the vehicle. This will usually last for a few seconds, depending on road surface and vehicle speed. This is completely normal and does not indicate any issue with your vehicle.

Reduced braking performance is usually temporary, and can occur for a number of reasons including high brake temperatures after heavy brake use, or driving in extremely cold or wet conditions. It can also indicate that your brake pads or rotors have worn to the point that normal replacement is needed.

If you continue to experience reduced braking performance which does not improve over time, please contact Tesla service at your convenience for a brake inspection.
$TSLA Shareholder since the beginning.
Post Reply